Floor Diagonal Open Cabinet -Standard size 720H,580v580W,300v300D

Custom sized cabinets.
Support:Toll-free 1300 876 778 or support@cabinetsondemand.com.au

STEP 2A: STANDARD units > - Standard BASE (Floor) Cabinets > Standard Floor Open Diagonal

Floor Diagonal Open Cabinet -Standard size 720H,580v580W,300v300D

Base (Floor) Diagonal OPEN Cabinet Size: Height to 720, Width to 580x580mm, Depth 200x200

Includes Door, solid back, bottom, left & right ends (gables), and a top rail. The bottom shelf for floor units is pre-drilled to accept the knock-in style plastic legs. See also the “General Construction” page.
One shelf as standard.

All Hardware for assembly, Door(s), Hinges and Plastic Adjustable feet are included - but a firm top is excluded.

You can still overwrite the default values shown with your specific values and a calculated price will be shown on the Shopping Cart (see label "ViewCart" above.

Height = Box Height Only (this does not include height of the Adjustable Legs/Kickboard or the thickness of the bench top).
Example: If a 900mm High over-all Bench height is desired:
900mm – Bench Top thickness (E.G.: 34mm) – Kickboard Height (E.G.: 146mm) = Cabinet Height 720mm.

Width = Outside Width of the Carcase (Cabinet) - excluding any Coloured Panels that may be required to be screwed on later."

Depth = Outside Depth of the Cabinets including the thickness of the Door (or Drawer Front)

Shelf(s) Required = Specify number of shelves required from 0 -7. Normally ONE for Cabinets < 750mm and 5-6 for Pantry cabinets. Cabinet price is adjusted for number specified.

Shelves = Choose between either Fixed or Adjustable type shelving.

Shelf Depth: [?]= Identifies if the Shelf is Set-in from the front, the Default is set to 80mm for Base cabinets. To modify - Select one of the options.

Door Style - Material Finish = Here is where you select the Material that you would like the Door made from –not the actual colour/manufacturer or finish, just the Material –As that’s all that’s needed at this stage. The most common Material is Laminate because it’s the most durable and also the lowest in cost (plus it looks good of course!) .

Carcass (Plain White Melamine) - 16mm thick High Mositure Resistant (HMR) particle board;

Laminate (Melamine) - 16mm thick Coloured ;

GLOSS Laminate (Formica) - 16mm thick;

Unfinished - 16mm Craftwood (MDF) - with a range of Face and Edge profiles - ready for DIY painting;

Belmont (Vinyl Wrap - TEXTURE finish) - 18mm thick with a range of Face and Edge profiles ;

Byron Bay (Vinyl Wrap - GLOSS finish) - 18mm thick with a range of Face and Edge profiles ;

Albany (Polyurethane painted - TEXTURE finish) - 18mm thick with a range of Face and Edge profiles ;

Avoca (Polyurethane painted - GLOSS finish) - 18mm thick with a range of Face and Edge profiles.

For a more detailed description of these different STYLES and Price considerations please see: Cost Considerations.

At the end of all your product ordering you MUST specify (using STEP 5: Colours & Profiles) your choice of Colour and Finish; you must have a colour choice for each product Style selected - the colour can either apply to one of: Doors & Drawers, Panels or Kickboards, or ALL of these.

You can mix different Product styles in an order, for example Painted Doors with Vinyl Wrap Panels, each with its own Colour and Profile- BUT if you want different colours for different products in a particular Style (for example Doors are specified In Beige, but you want Drawers in Light Green) then you should make a separate Order for these. (and let us know so we can ensure correct Discount calculations over both Orders.)

"Special Requests" can be used to: (for example) state you preferred Door Gap measure e.g. 1mm (in place of our standard 1.5mm); or any other need e.g. 'No shelf holes to be drilled'.

"Your Reference" is any reference you may want to make, for example to your Design Sketch/Drawing.

When you [CLICK] on the "Add To Quote" button the Product specifications are listed on a 'Shopping List' ( "Shopping Cart") that identifies all Products that you have selected for a "Final Quote" from the Production Manager.

Only when you are ready and the Items have been validated for consistency on YOUR PC will you be prompted to submit your personal details and the contents of the shopping cart to the central system for a final QUOTE.
Your data will be stored for some 12 days on your PC to allow easy order specification.

Use button to return to the Product Page

Return to Last Menu-->

For Main Menu ------->

Return to Home Page-->

View[Shopping]Cart--->