Custom sized cabinets.
Support:Toll-free 1300 876 778
or support@cabinetsondemand.com.au
|
Custom sized cabinets. |
 |
 |
|
||||||
|
Carcass is made from HMR 16mm PB. Wall cabinets includes Door(s), solid back, bottom, top, left & right ends (gables) and
Design: One to Two doors - depending on width; 1-6 shelves - standard 1 Shelf. We do offer some special features, such as Framed Doors for glass inserts. We do not supply the glass but will supply the Door frames in the following styles.
| |||||||
Please specify the Door Frame-Type in the Special Requests Box and we will calculate the additional cost and advice you before proceeding.
All Hardware for assembly, Door(s) and Hinges are included - Handles excluded (but see: Handles)
Wall (Upper) cabinets do not really have a Standard Height - but the Depth for a Normal Kitchen Wall Cabinet should be minimum 320 - 350mm (to fit dinner plates) - and maximum 500mm (inclusive of Door thickness) to prevent overloading strain.
All Hardware for assembly, Door(s), Hinges and Plastic Adjustable feet are included .
Please overwrite the default values shown in the Prompt Boxes with your specific values and a calculated price will be shown on the Shopping Cart (see label "ViewCart" above.
Height = Box Height Only
Width = Outside Width of the Carcase (Cabinet) - excluding any Coloured Panels that may be required to be screwed on later.
Depth = Outside Depth of the Cabinets including the thickness of the Door (or Drawer Front)
Shelf(s) Required = Specify number of shelves required from 0 -7. Normally ONE Shelf for Cabinets Less than 750mm High and two shelves for Cabinet of 900mm High. Cabinet price is adjusted for number specified.
Shelves = Choose between either Fixed or Adjustable type shelving.
Shelf Depth= Identifies if the Shelf is Set-in from the front, the Default is set to 15mm for Upper cabinets. To modify - Select one of the options.
Door Hang=" Select Right, Left or None as required.Door Style - Material Finish
At the end of all your product ordering you MUST specify (using STEP 5: Colours & Profiles) your choice of Colour and Finish; you must have a colour choice for each product Style selected - the colour can either apply to one of: Doors & Drawers, Panels or Kickboards, or ALL of these.
You can mix different Product styles in an order, for example Painted Doors with Vinyl Wrap Panels, each with its own Colour and Profile- BUT if you want different colours for different products in a particular Style (for example Doors are specified In Beige, but you want Drawers in Light Green) then you should make a separate Order for these. (and let us know so we can ensure correct Discount calculations over both Orders.)
"Special Requests" can be used to: (for example) state you preferred Door Gap measure e.g. 1mm (in place of our standard 1.5mm); or any other need e.g. 'No shelf holes to be drilled'.
"Your Reference" is any reference you may want to make, for example to your Design Sketch/Drawing.
When you [CLICK] on the "Add To Quote" button the Product specifications are listed on a 'Shopping List' ( "Shopping Cart") that identifies all Products that you have selected".
Only when you are ready and the Items have been validated for consistency on YOUR PC will you be prompted to submit your personal details and the contents of the shopping cart to the central system for a final QUOTE.
Your data will be stored for some 12 days on your PC to allow easy order specification.
Use 
button to return to the Product Page
