One or two door Pantry cabinets.   This pantry includes Door(s), solid back, bottom, top, left & right ends (gables). The bottom shelf is typically pre-drilled to accept the knock-in style plastic legs.Carcass is made from HMR 16mm PB. See the “General Construction” page on this web site for further, more detailed construction details. NOTE: Cost reductions apply in each Price Range if any of the ACTUAL Dimensions are less than the assumed sizes.

Please overwrite the default values shown in the Prompt Boxes with your specific values and a new calculated price will be shown on the Shopping Cart (see label "ViewCart" above.

Height = Box Height Only (this does not include height of the Adjustable Legs/Kickboard or the thickness of the bench top).
    Example: If a 900mm High over-all Bench height is desired:
      900mm – Bench Top thickness (E.G.: 34mm) – Kickboard Height (E.G.: 146mm) = Cabinet Height 720mm.

Width = Outside Width of the Carcase (Cabinet) - excluding any Coloured Panels that may be required to be screwed on later.

A Width exceeding 1000mm is not recommended for storage of heavy foodcontainers, fixed Shelving and/or a central divider helps to overcome possible sagging of a shelf under very heavy load.

Depth = Outside Depth of the Cabinets including the thickness of the Door (or Drawer Front)

Shelf(s) Required = Specify number of shelves required from 0 -7. Normally ONE for Cabinets < 750mm and 5-6 for Pantry cabinets. Cabinet price is adjusted for number specified.

Shelves = Choose between either Fixed or Adjustable type shelving.

Shelf Depth= Identifies if the Shelf is Set-in from the front, the Default is set to 80mm for Pantry cabinets. To modify - Select one of the options.

Door Hang=" Select Right, Left or None as required. 

Soft Close?  = Special Soft Close Hinges can be used, at a extra cost of $6.00 per hinge, or $12 per Door < 900mm in Height. Greater Height needs more hinges, up to 5 for >2100mm

Push to Open mechanism  = Instead of using door handles this mechanism will open the door after a good push- extra cost is $25 per Door. 

Door Style - Material Finish

• Carcass (Plain White Melamine) - 16mm thick High Mositure Resistant (HMR) particle board;
• Laminate (Melamine) - 16mm thick Coloured ;
• GLOSS Laminate (Formica) - 16mm thick;
• Unfinished - 16mm Craftwood (MDF) -  with a range of Face and Edge profiles - ready for DIY painting;
• Belmont (Vinyl Wrap - TEXTURE finish) -  18mm thick with a range of Face and Edge profiles ;
• Byron Bay (Vinyl Wrap - GLOSS finish) - 18mm thick with a range of Face and Edge profiles ;
• Albany (Polyurethane painted - TEXTURE finish) -  18mm thick with a range of Face and Edge profiles ;
• Avoca (Polyurethane painted - GLOSS finish) - 18mm thick with a range of Face and Edge profiles. 
  

•                  For a more detailed description of these  different STYLES and Price considerations please see:  Cost Considerations.

  At the end of all your product ordering you MUST specify (using STEP 5: Colours & Profiles) your choice of Colour and Finish; you must have a colour choice for each product Style selected - the colour can either apply to one of: Doors & Drawers, Panels or Kickboards, or ALL of these.

  You can mix different Product styles in an order, for example Painted Doors with Vinyl Wrap Panels, each with its own Colour and Profile- BUT if you want different colours for different products in a particular Style (for example Doors are specified In Beige, but you want Drawers in Light Green) then you should make a separate Order for these. (and let us know so we can ensure correct Discount calculations over both Orders.)

"Special Requests" can be used to: (for example) state you preferred Door Gap measure e.g. 1mm (in place of our standard 1.5mm); or any other need e.g. 'No shelf holes to be drilled'.

"Your Reference" is any reference you may want to make, for example to your Design Sketch/Drawing.

When you [CLICK] on the "Add To Quote" button the Product specifications are listed on a 'Shopping List' ( "Shopping Cart")  that identifies all Products that you have selected for a "Final Quote" from the Production Manager.

Only when you are ready and the Items have been validated for consistency on YOUR PC will you be prompted to submit your personal details and the contents of the shopping cart to the central system for a final QUOTE.
Your data will be stored for some 12 days on your PC to allow easy order specification.

Use button to return to the Product Page